Our new pulser-ready Fill-Rite 902 Series Cabinet Meters are redesigned and greatly enhanced version of our already top notch Fill-Rite 305 Series. First, the 902's cabinet is made of a more robust, 16-gauge metal, and powder coated to provide superior corrosion protection. We've redesigned the hood assembly to ensure easier installation and maintenance. Internal access is obtained by simply removing three screws and the reset knob. The tab in the meter lid has been removed to accommodate installation of the pulser head. There's a three-quarter-inch elbow so that the pulser can be wired directly into the junction box, and a new opening in the lid to accommodate easy wiring. The external nozzle boot has been removed, and the nozzle is stored in the cabinet. The nozzle retainer now doubles as a switch lever, making it impossible for the unit to be ON when the nozzle is stowed. There's also a more robust switch assembly. The linkage has fewer components, and the switch rod is thicker to prevent damage during operation. There are just three pipe joints to seal, and the inlet for all models is now on the bottom. There's also a larger, easier-to-read faceplate making all the pertinent information visible from the front of the meter (UL Versions and Non UL Versions available).